ceramic oxide grain abrasive belt BA 25x480mm CO-COOL40 for grinding stainless steel with a belt grinder

Technical information

Abrasive: CO-COOL
Acc. to ISO: ISO 2976
Grit size: 40
Length: 480 mm
Width: 25 mm
Packaging unit: 20 pieces

Description

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.

Short belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Advantages

High tear strength with optimum flexibility.
Consistent results through very good grain adhesion.
High economic efficiency due to high abrasive performance and long tool life.

Recommendations for use

Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes

Follow the safety notes from the VDS (German Abrasives Association) â€œSafety notes for correct use of abrasive beltsâ€.

Materials that can be worked: Aluminium; Annealed cast iron; Bronze; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Titanium

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Drive types: Belt grinders and belt arms

Downloads

Short belts

ceramic oxide grain abrasive belt BA 25x480mm CO-COOL40 for grinding stainless steel with a belt grinder

Matching accessories & spare parts

PFERD Newsletter subscription