Tungsten carbide burr conical pointed SKM dia. 10x20 mm shank dia. 6 mm Z5 universal fine

Technical information

Angle: 28 °
Cut: 5
Dia. external: 10 mm
Dia. shank: 6 mm
Length, cut: 20 mm
Length, total: 2,362
Length, total: 60 mm
RPM from, hard non-ferrous metals: 11000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 11000 RPM
RPM from, high-temperature-resistant materials: 11000 RPM
RPM from, rust and acid-resistant steels: 11000 RPM
RPM from, steels up to 1,200 N/mm²: 14000 RPM
RPM to, hard non-ferrous metals: 14000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 14000 RPM
RPM to, high-temperature-resistant materials: 19000 RPM
RPM to, rust and acid-resistant steels: 14000 RPM
RPM to, steels up to 1,200 N/mm²: 19000 RPM
Packaging unit: 1 piece

Description

Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Conical pointed burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Advantages

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

Recommendations for use

To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Bronze; Case-hardened steels; Cast steel; Cobalt-based alloys; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Tungsten carbide burrs for general use, cut 5, conical pointed shape SKM

Tungsten carbide burr conical pointed SKM dia. 10x20 mm shank dia. 6 mm Z5 universal fine

Matching tool drive

PFERD Newsletter subscription