Tungsten carbide burrs for high performance, INOX HC-FEP, tree shape with radius end RBF

Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel

Item number:
21117781
EAN:
4007220222386

Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information
Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel

Cut
INOX HC-FEP
Dia. external
10 mm
Dia. shank
6 mm
Length, cut
20 mm
Length, total
2,362
Length, total
60 mm
RPM from, hard non-ferrous metals
8000 RPM
RPM from, rust and acid-resistant steels
14000 RPM
RPM from, soft non-ferrous metals
8000 RPM
RPM to, hard non-ferrous metals
19000 RPM
RPM to, rust and acid-resistant steels
24000 RPM
RPM to, soft non-ferrous metals
19000 RPM
Radius corner design
2.5 mm
Packaging unit
1 piece
Description

High-performance cut INOX with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Tree-shaped burr with radius end according to DIN 8032.

Advantages
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Materials that can be worked
Hard non-ferrous metal
Stainless steel (INOX)
Titanium
Titanium alloys
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.