HSSE Co5 conical and deburring countersink 90° dia. 16.5 mm shank dia. 10 mm DIN 335 C with unequal pitch

Technical information

HSSE Co5 conical and deburring countersink 90° dia. 16.5 mm shank dia. 10 mm DIN 335 C with unequal pitch

Angle: 90 °
Dia. shank: 10 mm
Diameter: 16.5 mm
Length, total: 2,362
Length, total: 60 mm
RPM from, grey cast iron, white cast iron: 190 RPM
RPM from, hard non-ferrous metals: 190 RPM
RPM from, rust and acid-resistant steels: 190 RPM
RPM from, soft non-ferrous metals: 290 RPM
RPM from, steels over 700 N/mm²: 190 RPM
RPM from, steels up to 700 N/mm²: 290 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 190 RPM
RPM to, grey cast iron, white cast iron: 190 RPM
RPM to, hard non-ferrous metals: 380 RPM
RPM to, rust and acid-resistant steels: 290 RPM
RPM to, soft non-ferrous metals: 380 RPM
RPM to, steels over 700 N/mm²: 290 RPM
RPM to, steels up to 700 N/mm²: 380 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 290 RPM
Version: HSSE UGT
Packaging unit: 1 piece

Description

Conical countersinks from PFERD are characterized by their particularly sharp blades that are able to achieve very good results, even at low cutting speeds.

High-performance tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content.

Advantages

Very high stock removal rate and optimum chip removal.
Burr-free results even at low cutting speeds.
Long tool life.
High workpiece surface quality.
Smooth running.
Low countersinking force and a good surface quality.
Specially developed geometry with wide flutes for optimal chip removal and heat dissipation.

Recommendations for use

Use cutting oil or compressed air as a coolant/lubricant.
Particularly well suited to producing exact countersinks.

Materials that can be worked: Aluminium; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Chipboard; Cobalt-based alloys; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Hardwood; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other; Other non-ferrous metals; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Countersinking

Drive types: Column drill; Power drill; Robot; Stationary machines; Tool machine

Downloads

UGT HSSE DIN 35 C90 Co5

HSSE Co5 conical and deburring countersink 90° dia. 16.5 mm shank dia. 10 mm DIN 335 C with unequal pitch

Included in

PFERD Newsletter subscription