HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous 1

HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous 2

HSS rotary cutters, cut ALU, cylindrical shape A-ST with end cut

HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous

Item number: 22405916

EAN: 4007220801345

Retailers-Search

Technical information

HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous

Cut: ALU
Dia. external: 16 mm
Dia. external [inch]: 5 /8 Inch
Dia. shank: 6 mm
Dia. shank [inch]: 6 mm
Length, cut: 25 mm
Length, total: 65 mm
Length, total [inch]: 2.9 /16 Inch
RPM from, soft non-ferrous metals: 4000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 4000 RPM
RPM to, soft non-ferrous metals: 6000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 6000 RPM
Packaging unit: 1 piece

Description

The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.

Cylindrical burr with end cut.

Advantages

Highly aggressive.
Can be used at low rotational speeds.
Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.

Materials that can be worked: Aluminium; Brass; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Plastics; Soft aluminium alloys; Thermoplastics; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Work on weld seams

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Europe

America

Asia & Pacific

Africa

Global

HSS rotary cutters, cut ALU, cylindrical shape A-ST with end cut

HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous

HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous