Tungsten carbide burrs for high performance, TOUGH- S, cylindrical shape with radius end WRC

Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant

Item number:
21000038
EAN:
4007220770139
Technical information
Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant

Cut
TOUGH-S
Dia. external
12 mm
Dia. shank
6 mm
Length, cut
25 mm
Length, total
2,559
Length, total
65 mm
RPM from, grey cast iron, white cast iron
7000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²
7000 RPM
RPM from, steels up to 1,200 N/mm²
7000 RPM
RPM to, grey cast iron, white cast iron
16000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²
9000 RPM
RPM to, steels up to 1,200 N/mm²
16000 RPM
Packaging unit
1 piece
Description

The TOUGH-S cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH-S cut are characterized by smooth milling and high stock removal.

Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Advantages
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • Observe the recommended rotational speeds.
  • The TOUGH-S cut can be used on materials up to 54 HRC. For harder materials, it is recommended to perform trials beforehand.
  • Tungsten carbide burrs the TOUGH-S cut are also suitable for applications involving impact when using shank extensions, for applications with a high surface contact angle, for milling narrow contours, or for applications where high rotational speeds are not available.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Materials that can be worked
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Case-hardened steels
Cast iron
Cast steel
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Steel
Steel, cast steel
Steel materials with a hardness > 54 HRC
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Tool steels
White annealed cast iron (GTW, GJMW)
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.