The correct rotational speed for any material – in our free white paper.
Legal notice Data protection Career

BW 7 DIN10/G22

Flexible shaft BW 7 DIN10/G22 25,000-11,000 RPM

BW 7 DIN10/G22
Item number:
86100509
EAN:
4007220428504
Flexible shaft BW 7 DIN10/G22 25,000-11,000 RPM 1
Flexible shaft BW 7 DIN10/G22 25,000-11,000 RPM 1
Technical data
Login / Register
Retailers-Search
Technical information
Flexible shaft BW 7 DIN10/G22 25,000-11,000 RPM
Dia. drive-side coupling [mm]
30
Dia. external
18 mm
Drive-side coupling, DIN
10
Handpiece-side coupling G
22
Handpiece-side coupling dia. [mm]
22
Height
18 mm
Length
1654 mm
Net weight
1.536 kg
PFERD TOOLS type
BW 7 DIN10/G22
Rotational speed range
11.000 - 25.000 RPM
Version
Flexible shaft system 7
Width
18 mm
Packaging unit
1 piece
Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core consists of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber; the interior being a flat steel spiral and the outside being solid rubber. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. Because of low noise emissions, continuous operation with little fatigue is possible. Exchangeable collets enable a wide range of tools to be mounted. The sliding coupling enables quick handpiece changes.

Flexible shaft incl. handpiece HA 7 G22.
Recommendations for use
  • It is essential that the rotational speed and power output do not fall below or exceed the specified ranges.
  • It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
  • When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.
  • The radius of curvature should not be smaller than 140 mm.
  • For maintenance of the flexible shaft, PFERD TOOLS recommends the P-SET BW 7 maintenance set with flexible shaft grease FT 4.
Ordering notes
  • Special lengths available on request.
  • Cores and hoses with double-sided sliding coupling on request.
Downloads
wzh25-catalogue-9-web-int-en.pdf katalog-9-update-2022-web-en.pdf 237075_ha_7_g22.pdf
See more
Scroll to top

PFERD TOOLSNewsletter subscription

Register here free of charge for our PFERD TOOLS newsletter and receive all the latest news on products, services and promotions from the world of PFERD TOOLS on a regular basis.