End brushes crimped shank-mounted

End brush crimped PBU dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20

Item number:
43204007
EAN:
4007220530924

Login / Register
Choose options
Dia. external
Dia. filament material
Filament material
Packaging
Packaging unit
Technical information
End brush crimped PBU dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20

Dia. cup
10 mm
Dia. external
10 mm
Dia. filament material
0.2 mm
Dia. shank
6 mm
Filament material
Stainless steel wire (INOX)
Length, filament
20 mm
Length, total
2-9/16
Length, total
65 mm
Max. RPM
20000 RPM
Mounting system
Shank
Packaging
Industrial packaging
RPM, optimum, from
8000 RPM
RPM, optimum, to
13000 RPM
Packaging unit
10 pieces
Description

Suitable for light brushing such as deburring, cleaning and derusting.

End brush with plastic-covered brush body.

In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1.4310 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Advantages
  • Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation.
  • The plastic covering prevents the risk of corrosion.
  • Very good corrosion resistance.
  • Creates fine surfaces.
  • The brush is degreased and does not leave any oil residue on the workpiece.
Recommendations for use
  • Please observe the recommended rotational speeds.
  • For the best results, use a tool drive with a minimum output of 300 watts.
Safety notes
  • When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.
Materials that can be worked
Aluminium
Bronze
Cobalt-based alloys
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other non-ferrous metals
Soft titanium alloys (tensile strength 500 N/mm²)
Stainless steel (INOX)
Titanium
Titanium alloys
Applications
Cleaning
Deburring
Derusting
Paint stripping
Removing heat discolouration
Removing oxide layers
Roughening
Drive types
Drive spindle
Flexible shaft drive
Power drill
Straight grinder
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.