HSS countersink, HICOAT DIN 335 C 90°

HSS conical and deburring countersink 90 ° dia. 25 mm shank dia. 10 mm DIN 335 C HICOAT coated

Item number:
25202150
EAN:
4007220168462

Login / Register
Choose options
Diameter
Technical information
HSS conical and deburring countersink 90 ° dia. 25 mm shank dia. 10 mm DIN 335 C HICOAT coated

Angle
90 °
Dia. shank
10 mm
Diameter
25 mm
Length, total
2,638
Length, total
67 mm
RPM from, grey cast iron, white cast iron
130 RPM
RPM from, rust and acid-resistant steels
130 RPM
RPM from, soft non-ferrous metals
200 RPM
RPM from, steels up to 700 N/mm²
200 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP)
130 RPM
RPM to, grey cast iron, white cast iron
130 RPM
RPM to, rust and acid-resistant steels
200 RPM
RPM to, soft non-ferrous metals
260 RPM
RPM to, steels up to 700 N/mm²
260 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP)
200 RPM
Version
HC-FEP
Packaging unit
1 piece
Description

Conical countersinks from PFERD are characterized by their particularly sharp right-hand blades that are able to achieve very good results, even at low cutting speeds. In addition, conical countersinks with a HICOAT coating provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.

High-performance countersink tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel. To ensure reliable torque transmission, conical countersinks have a three-surface shaft from a countersink diameter of 28 mm. Thanks to the HICOAT coating HC-FEP, they have high hardness and wear resistance. They are very temperature resistant and have a particularly long tool life. They can also be used in a higher cutting speed range and without coolants and lubricants.

Recommendations for use
  • Particularly well suited for producing countersinks for 90° screws.
Materials that can be worked
Aluminium
Annealed cast iron
Black annealed cast iron (GTS, GJMB)
Brass
Bronze
Case-hardened steels
Cast iron
Chipboard
Cobalt-based alloys
Copper
Elastomers
Fibre-reinforced thermosetting plastics (GRP, CRP)
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %
Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hard aluminium alloys
Hard non-ferrous metal
Hardwood
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Nickel or titanium-based superalloys
Other
Other non-ferrous metals
Plastics
Soft aluminium alloys
Soft non-ferrous metal
Soft titanium alloys (tensile strength 500 N/mm²)
Soft wood
Stainless steel (INOX)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Thermoplastics
Thermosetting plastics
Titanium
Titanium alloys
Tool steels
Tough aluminium alloys
White annealed cast iron (GTW, GJMW)
Wood
Zinc
Applications
Countersinking
Drive types
Column drill
Power drill
Robot
Stationary machines
Tool machine
Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.