Poliflex discs

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60

Item number:: 41130006
EAN:: 4007220536377

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60 2

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60 3

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60 4

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60 5

Technical data Change variant

Retailers-Search

Choose options

Bond

PUR-MH PUR-W

Dia. external

115 mm

Grit size

60 150

Reset Filter

Technical information

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60

Abrasive: Silicon carbide SiC/C
Bond: PUR-W
Dia. external: 115 mm
Dia. hole: 22.23 mm
Grit size: 60
Max. RPM: 5300 RPM
RPM, optimum: 2400 RPM
Version: soft
Width: 14 mm
Packaging unit: 5 pieces

Description

Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.

For fine face-down grinding on large surfaces.

Poliflex fine grinding tools with the PUR bond are manufactured with green silicon carbide (SiC). The PUR bond is a very soft bond which is available in two hardness grades (PUR-W, PUR-MH). It is homogeneously interspersed with abrasive grain.

Advantages

Produces very good surface quality.
High economic efficiency thanks to long tool life and high stock removal rate.
Maximum working convenience through precise concentricity.
Cool and very gentle grinding thanks to open structure and elastic bond.
Produces a fine, matt surface finish.

Recommendations for use

Depending on the intended use, profile using a dressing diamond or ceramic dressing stone at a low rotational speed.
For the best results, use at a recommended cutting speed of 10-15 m/s.
Preferably for use on slow-running angle grinders.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
The clamping length of the shank has to be at least 10 mm.

Materials that can be worked: Aluminium; Brass; Cast steel; Copper; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Zinc

Applications: Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Angle grinder; Cordless angle grinder

Downloads

Poliflex discs

Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR soft SIC60

PFERD Newsletter subscription