POLIROLL PR cylindrical cartridge rolls dia. 6x25 mm hole dia. 3 mm aluminium oxide A150

Technical information

Abrasive: Aluminium oxide A
Dia. external: 6 mm
Grit size: 150
Height: 25 mm
Max. RPM: 25000 RPM
RPM, optimum: 20000 RPM
Packaging unit: 50 pieces

Description

For general grinding work on metals and other materials.

POLIROLL cartridge rolls consist of spirally wound, coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.

Advantages

Consistently high grinding performance throughout its entire tool life thanks to ongoing exposure of fresh abrasive grain during application.
Secure fit when in use due to self-tensioning provided by grooved, conical arbor.
Easy tool change.

Recommendations for use

Grind with the point rather than the flat surface so as not to damage the bond through the effect of heat.
Mount POLIROLL with the bonded side facing towards the arbor.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes

The maximum permitted peripheral speed is 11 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Annealed cast iron; Brass; Cast steel; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Drive types: Flexible shaft drive; Straight grinder

Downloads

POLIROLL cartridge rolls cylindrical

POLIROLL PR cylindrical cartridge rolls dia. 6x25 mm hole dia. 3 mm aluminium oxide A150

Matching accessories & spare parts

Included in

PFERD Newsletter subscription