Strike plate burrs SBF

The profile cylinder burr PZF for locksmiths from PFERD is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD impresses with its good tool life, despite the challenging application.

Using conventional burrs takes several minutes to open a profile cylinder of a security lock. Thanks to its extremely high stock removal rate, PFERD’s innovative solution usually enables you to complete this task in under one minute – depending on the lock.

Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

The strike plate burr SBF for locksmiths, police and fire service from PFERD is the optimum tool for milling strike plates (e.g. facings or security covers) in order to expose the profile cylinder behind it. The burr is therefore the perfect addition to the profile cylinder burrs PZF. Thanks to the specially developed burr geometry, the formation of built-up edges and tool clogging when working on particularly soft aluminium materials is prevented.