Tungsten carbide burr pointed tree SPG dia. 12x25mm shank dia. 6mm Z3P universal medium cross cut HICOAT

Technical information

Cut: 3 PLUS HC-FEP
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 2,559
Length, total: 65 mm
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 7000 RPM
RPM from, steels up to 1,200 N/mm²: 12000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 12000 RPM
RPM to, steels up to 1,200 N/mm²: 20000 RPM
Packaging unit: 1 piece

Description

Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Pointed tree-shaped burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Case-hardened steels; Cast steel; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

Tungsten carbide burrs for general use, cut 3 PLUS HC-FEP, pointed tree shape SPG

Tungsten carbide burr pointed tree SPG dia. 12x25mm shank dia. 6mm Z3P universal medium cross cut HICOAT

PFERDEFFICIENCY

Matching tool drive

PFERD Newsletter subscription