Tungsten carbide burrs for general use, cut 4, tree shape with radius end RBF

Tungsten carbide burr tree shape with radius end RBF dia. 10x20 mm shank dia. 6 mm Z4 universal medium fine

Item number: 21117746
EAN: 4007220047729
Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information

Tungsten carbide burr tree shape with radius end RBF dia. 10x20 mm shank dia. 6 mm Z4 universal medium fine


Cut
4
Dia. external
10 mm
Dia. external [inch]
25 /64 Inch
Dia. shank
6 mm
Dia. shank [inch]
6 mm
Length, cut
20 mm
Length, total
60 mm
Length, total [inch]
2.23 /64 Inch
RPM from, hard non-ferrous metals
8000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²
8000 RPM
RPM from, high-temperature-resistant materials
8000 RPM
RPM from, rust and acid-resistant steels
8000 RPM
RPM to, hard non-ferrous metals
11000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²
11000 RPM
RPM to, high-temperature-resistant materials
14000 RPM
RPM to, rust and acid-resistant steels
14000 RPM
Radius
2.5 mm
Packaging unit
1 piece
Description

Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.

Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.

Tree-shaped burr with radius end according to DIN 8032 with cut conforming to DIN 8033.

Advantages
  • Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
  • Long tool life.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
  • High surface quality.
Recommendations for use
  • If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Materials that can be worked
Bronze
Case-hardened steels
Cast steel
Cobalt-based alloys
Hard aluminium alloys
Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC)
Hard non-ferrous metal
High-temperature-resistant materials
Nickel-based alloys (e.g. Inconell and Hastelloy)
Stainless steel (INOX)
Steel
Steel, cast steel
Steels over 700 N/mm² (> 220 HB)
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Titanium
Titanium alloys
Tool steels
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
Downloads
chevron-leftAlertBrowse fileFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSort NoneSort ASCSort DESC