Tungsten carbide burrs for high performance, FVKS, cylindrical shape ZYA without end cut

Tungsten carbide burr cylindrical ZYA dia. 08x25 mm shank dia. 8 mm FVKS for plastics (GRP/CRP)

Item number:: 21458897
EAN:: 4007220808917

Tungsten carbide burr cylindrical ZYA dia. 08x25 mm shank dia. 8 mm FVKS for plastics (GRP/CRP) 2

Tungsten carbide burr cylindrical ZYA dia. 08x25 mm shank dia. 8 mm FVKS for plastics (GRP/CRP) 3

Tungsten carbide burr cylindrical ZYA dia. 08x25 mm shank dia. 8 mm FVKS for plastics (GRP/CRP) 4

Technical data Change variant

Retailers-Search

Choose options

Dia. external

6 mm 8 mm

Dia. shank

6 mm 8 mm

Version

BS ZBS

Reset Filter

Technical information

Tungsten carbide burr cylindrical ZYA dia. 08x25 mm shank dia. 8 mm FVKS for plastics (GRP/CRP)

Cut: FVKS
Dia. external: 8 mm
Dia. shank: 8 mm
Length, cut: 25 mm
Length, total: 2,559
Length, total: 65 mm
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content over 40 %: 18000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content over 40 %: 36000 RPM
Version: BS
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the FVKS cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are also suitable for general use on hard glass and carbon-fibre-reinforced duroplastics. Due to its high concentricity, the FVKS cut is suitable for tool machines and manual applications. It is characterized by smooth milling and produces a smooth cut edge. The FVKS cut is suitable for use on machines and robots with high feed rates.

Cylindrical burr with drill cut.

Burrs with a drill cut (BS) allow combined drilling and milling work.

Advantages

Particularly well suited to GRP and CRP, also with > 40 % fibre content.
Creates smooth edges and is characterized by smooth milling action.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Select a burr diameter greater than the thickness of the material to be machined, to avoid impacts and chattering with the risk of damaging or breaking the tool.
Increase the rotational speed if the tool tends to chatter.
If necessary, reduce the rotational speed and contact pressure if melting occurs.
To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
Burrs with a drill cut (BS) are particularly well-suited for machine and robot applications.

Materials that can be worked: Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Plastics; Thermoplastics

Applications: Cutting out holes; Deburring; Drilling; Leveling; Milling; Milling out; Surface work; Trimming

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 3/370 RS PGAS 3/370 RS

Tungsten carbide burrs for high performance, FVKS, cylindrical shape ZYA without end cut

Tungsten carbide burr cylindrical ZYA dia. 08x25 mm shank dia. 8 mm FVKS for plastics (GRP/CRP)

Matching tool drive

PFERD Newsletter subscription