Tungsten carbide burrs for high performance, INOX, tree shape with radius end RBF

Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 06x13 mm shank dia. 3 mm for stainless steel

Item number:
21230082
EAN:
4007220930489

Login / Register
Choose options
Dia. external
Dia. shank
Length, cut
Length, total
Technical information
Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 06x13 mm shank dia. 3 mm for stainless steel

Cut
INOX
Dia. external
6 mm
Dia. shank
3 mm
Length, cut
13 mm
Length, total
1,693
Length, total
43 mm
RPM from, hard non-ferrous metals
13000 RPM
RPM from, rust and acid-resistant steels
24000 RPM
RPM from, soft non-ferrous metals
13000 RPM
RPM to, hard non-ferrous metals
24000 RPM
RPM to, rust and acid-resistant steels
32000 RPM
RPM to, soft non-ferrous metals
24000 RPM
Radius corner design
1.5 mm
Packaging unit
1 piece
Description

With the INOX cut, PFERD has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.

Tree-shaped burr with radius end according to DIN 8032.

Advantages
  • Excellent stock removal rate and tool life due to innovative tooth geometry.
  • Achieves high surface qualities through optimum chip formation.
  • Prevents heat discolouration in the material due to reduced heat production.
  • The highly accurate concentricity enables impact­free working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
  • To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
  • Observe the recommended rotational speeds.
  • If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
  • To ensure cost­effective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.
Safety notes
  • The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Materials that can be worked
Hard non-ferrous metal
Stainless steel (INOX)
Titanium
Titanium alloys
Applications
Cutting out holes
Deburring
Leveling
Milling
Milling out
Surface work
Work on weld seams
Drive types
Drive spindle
Flexible shaft drive
Robot
Stationary machines
Straight grinder
Tool machine
PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the INOX cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff
product.aggregation.prv-eff

PFERDERGONOMICS

recommends burrs with the INOX cut as an innovative tool solution for comfort when working, with significantly reduced vibration and less noise.
product.aggregation.prv-ergo
product.aggregation.prv-ergo
product.aggregation.prv-ergo

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.