Tungsten carbide burrs for high performance, NON FERROUS, conical shape with radius end KEL

Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm non-ferrous metals

Item number:: 21125296
EAN:: 4007220533116

Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm non-ferrous metals 2

Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm non-ferrous metals Youtube

Technical data Change variant

Retailers-Search

Choose options

Dia. external

10 mm 12 mm 16 mm

Dia. shank

6 mm 8 mm

Length, cut

20 mm 30 mm

Length, total

60 mm 70 mm

Reset Filter

Technical information

Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm non-ferrous metals

Angle: 14 °
Cut: NON-FERROUS
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 2,756
Length, total: 70 mm
RPM from, hard non-ferrous metals: 16000 RPM
RPM from, soft non-ferrous metals: 12000 RPM
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP): 16000 RPM
RPM to, hard non-ferrous metals: 24000 RPM
RPM to, soft non-ferrous metals: 16000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP): 29000 RPM
Radius corner design: 2.6 mm
Packaging unit: 1 piece

Description

PFERD has developed the NON-FERROUS cut for general-purpose use on non-ferrous metals and fibre-reinforced plastics. This cut is characterized by its high stock removal rate.

Conical burr with round radius end according to DIN 8032.

Advantages

Very good stock removal rate when used on non-ferrous metals such as brass and copper, plastics and fibre-reinforced plastics.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard non-ferrous metal; Plastics; Thermoplastics; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 3/370 RS PGAS 3/370 RS

Tungsten carbide burrs for high performance, NON FERROUS, conical shape with radius end KEL

Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm non-ferrous metals

Matching tool drive

PFERD Newsletter subscription