Tungsten carbide burrs for high performance, PLAST, cylindrical shape ZYA without end cut

Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics

Item number:: 21455696
EAN:: 4007220900413

Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics 2

Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics 3

Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics Youtube

Technical data Change variant

Retailers-Search

Choose options

Dia. external

6 mm 8 mm

Dia. shank

6 mm 8 mm

Version

BS FSTS STS ZBS

Reset Filter

Technical information

Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics

Cut: PLAST
Dia. external: 6 mm
Dia. shank: 6 mm
Length, cut: 25 mm
Length, total: 2,559
Length, total: 65 mm
RPM from, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 24000 RPM
RPM to, thermoplastics, fibre-reinforced plastics (GRP/CRP) with a fibre content under 40 %: 48000 RPM
Version: BS
Packaging unit: 1 piece

Description

Tungsten carbide burrs with the PLAST cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are particularly suitable for use on less hard glass and carbon-fibre-reinforced duroplastics (GRP and CRP ≤ 40 % fibre content) and fibre-reinforced thermoplastics. The PLAST cut (similar to PCD milling) minimizes delamination and fraying.

Cylindrical burr with drill cut.

Burrs with a drill cut (BS) allow combined drilling and milling work.

Advantages

Particularly suitable for GRP and CRP ≤ 40 % fibre content.
Minimized delamination and fraying due to the special cut that is similar to PCD mills.
Particularly suitable for use on machines and on robots.
Very low cutting force.
High feed rates.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

Select a burr diameter greater than the thickness of the material to be machined, to avoid impacts and chattering with the risk of damaging or breaking the tool.
Increase the rotational speed if the tool tends to chatter.
If necessary, reduce the rotational speed and contact pressure if melting occurs.
To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
Burrs with a drill cut (BS) are particularly well-suited for machine and robot applications.

Materials that can be worked: Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Plastics; Thermoplastics

Applications: Cutting out holes; Deburring; Drilling; Leveling; Milling; Milling out; Surface work; Trimming

Drive types: Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the PLAST cut for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.