Tungsten carbide burrs for high performance, special cut (SP), radius burr R

Tungsten carbide radius burr R dia. 16x18 mm shank dia. 8 mm SP work on edges

Item number:: 21143588
EAN:: 4007220049167

Tungsten carbide radius burr R dia. 16x18 mm shank dia. 8 mm SP work on edges 2

Technical data Change variant

Retailers-Search

Choose options

Dia. external

6 mm 8 mm 16 mm

Dia. shank

6 mm 8 mm

Length, cut

5 mm 12 mm

Length, total

65 mm 118 mm

Reset Filter

Technical information

Tungsten carbide radius burr R dia. 16x18 mm shank dia. 8 mm SP work on edges

Cut: Special cut (SP)
Dia. external: 16 mm
Dia. shank: 8 mm
Length, construction: 18 mm
Length, cut: 12 mm
Length, total: 4,645
Length, total: 118 mm
RPM from, grey cast iron, white cast iron: 9000 RPM
RPM from, hard non-ferrous metals: 5000 RPM
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 5000 RPM
RPM from, rust and acid-resistant steels: 5000 RPM
RPM from, soft non-ferrous metals: 12000 RPM
RPM from, steels up to 1,200 N/mm²: 9000 RPM
RPM to, grey cast iron, white cast iron: 12000 RPM
RPM to, hard non-ferrous metals: 7000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 7000 RPM
RPM to, rust and acid-resistant steels: 7000 RPM
RPM to, soft non-ferrous metals: 18000 RPM
RPM to, steels up to 1,200 N/mm²: 12000 RPM
Radius corner design: 6 mm
Packaging unit: 1 piece

Description

Radius burrs with a concave shape and special cut. Suitable for the production and processing of outer radii and rounded edges.

Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas. They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges.

Version with concave shape, tapered towards shank.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Can be guided as desired.
Extremely flexible for use in hard-to-reach areas.
Creates almost exact chamfers and radii.

Recommendations for use

In exceptional cases, it is possible to work at less than 3,000 RPM. This is preferable for certain stationary applications or when countersinking with 360° use of the burr surface.
For applications with low stock removal (deburring, chamfering, minor work on surfaces), the rotational speed can be increased by up to 100 %.
In general, burrs are used counterrotationally or with a swinging motion. To achieve fine finishes or to achieve very smooth chamfers, pass the tool rapidly over the workpiece in the direction of rotation.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Materials that can be worked: Cast steel; Steel; Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Titanium; Titanium alloys; Tool steels

Applications: Deburring; Milling; Rounding; Working on edges; Working on edges (chamfering, rounding)

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/24 RS PGAS 4/24 RS

Tungsten carbide burrs for high performance, special cut (SP), radius burr R

Tungsten carbide radius burr R dia. 16x18 mm shank dia. 8 mm SP work on edges

Matching tool drive

PFERD Newsletter subscription